Getting Through the Home Inspection
Whole-home inspections cover numerous systems within the house, but there are a handful of hot-spots that seem to worry buyers the most:
Mold & Mildew
Mildew stains and odors scare buyers, especially now that toxic black mold is such a hot topic, and chances are you won't even get an acceptable offer if mold and mildew are present. Even if the mold in your house is the normal variety kill it and fix the source of the problem.
Damp Basements and Crawlspaces
Mildew odors signal that a basement is too moist.
Buyers and home inspectors will look closely at the walls and floors for patches of mildew and signs of dampness. The inspector might use a meter to determine how much moisture is present in these spaces, because moisture deteriorates building materials and attracts insects.
Cover exposed earth in basements and crawl spaces with plastic to help keep moisture levels down.
Most foundation "leaks" we see are a result of poor drainage that funnels water towards the foundation.
- Make sure gutters are clean so that rainwater flows toward downspouts instead of spilling over gutter sides along the foundation.
- Point drainage downspouts away from the house.
- Check water flow through buried drainage lines by flooding them with water from a hose. If water comes back towards you the line is plugged and should be cleared.
If foundation problems do exist, and you cannot make repairs, you might need to lower the price of the house upfront, with the understanding that the price reflects the problem. Another option is to give the buyers an allowance to make repairs after closing.
Roofs and Chimneys
Deteriorated shingles or other roof coverings are one of the first things home buyers and home inspectors notice. If the elements underneath the shingles are moist or rotted, you can bet repairs will be requested.
Make sure flashing around the base of the chimney is watertight, and that mortar and bricks are in good condition.
Inspect the fireplace to make sure it is functioning properly.
Plumbing Problems
Fix leaks long before the home inspection takes place. The inspector will check water pressure by turning on multiple faucets and flushing toilets at the same time. The inspector will also run the dishwasher.
The home inspector might check the septic system. One method uses dyes that are flushed down a stool. The inspector waits to see if the dye surfaces on top of the septic drainfield, which would indicate a drainage problem.
Inadequate or Inferior Electrical Systems
The electrical panel and circuit breaker configuration should be adequate for the needs of the house.
The inspector will look for receptacles with ground fault circuit interrupters (GFI) in bathrooms and kitchens. These receptacles contain mini circuit breakers that click off during a short circuit or overload. The home inspector will likely make sure the receptacles are what they appear to be, and not "dummies" that arent wired correctly.
The inspection will test a portion of the remaining receptacles in the house.
Other Important Home Inspection Checks
The home inspector will check the heating and cooling systems, making sure they work and commenting about their efficiency.
The home inspector will take a close look at the structure and foundation.
The home inspector will check appliances that remain with the house, including smoke detectors.
Before the Home Inspection
Do everything you can to get the house in good condition before you attempt to sell it, but dont be discouraged if the inspection report contains a few negative statements. Home inspectors make note of everything they see.
Home Inspection Checklist of Items Not Inspected
A home inspectors standard practice typically does not include the following, for which a specific license to inspect and identify is required:
Asbestos
Radon
Wood-Destroying Organisms
Mold, Mildew and Fungi
Rodents
Lead